Epson l350 blinking ink and paper light

How to reset ink level L350 EPSON printer is actually quite easy, but for those who are confused because the first use of this type of printer would definitely look for a utility or tool to reset the reset or program errors with a red LED indicator lights illuminate. If we look at the monitor printer status message says "Its time to reset the ink level", please differentiated by waste ink pad, let me not be mistaken his error. If we click on the "How To" we will be asked to fill with genuine Epson ink until the ink level corresponding to the ink tank. Although it has been filled with ink but the red light remains on continuously and can not be used to print / print.

How to cope with pressing the triangle button in red circle one alone can solve this problem, without the need for any software resetter.

See also : How to reset L350 blinking

If this way does not work, try the other way. - First turn on the printer - Press the Resume button for 5 seconds then release. - Then press the Resume button for 3 seconds and then off again. - Press the button again resume quickly.

Done, now you can use your printer as normal.

You can often diagnose problems with your printer by checking the printer lights.

Lights
1	power
2	WiFi
3	maintenance box
4	paper
5	ink out

Light status	Condition/solution
The power light is on	The printer is turned on.
The power light is flashing	The printer is busy. Wait for the power light to stop flashing before turning off the printer.
The WiFi light is green	The printer is connected to the wireless network.
The WiFi light is orange	Wi-Fi connection error. Press the Wi-Fi button to clear the error and try to connect again.
The maintenance box light is on	The maintenance box is at the end of its service life or not installed. Press the black cleaning and color cleaning buttons at the same time to clear the error, then install or replace the maintenance box.
The maintenance box light is flashing	The maintenance box is near the end of its service life. Make sure you have a replacement maintenance box.
The paper light is on	Paper may be out. Load more paper in the cassette or rear MP tray and press the paper feed button to continue.
If multiple sheets have fed, press the paper feed button to eject the paper.
The paper size selected may not match any of the sizes set for the paper sources. Press the paper feed button to clear the error, and select the right paper size.
If the paper cassette is not installed, install it and press the paper feed button.
The paper light is flashing	Paper has jammed in the printer. Check in the cassette, inside the printer, and in the duplexer to remove the jammed paper. Then press the paper feed button to clear the error.
The power and paper light are flashing	The front cover is open. Close the cover.
An ink out light is on	An ink cartridge is expended or not installed correctly. Replace the indicated cartridge. Make sure the cartridge is installed correctly
An ink out light is flashing	An ink cartridge is low. Make sure you have a replacement cartridge.
All lights are flashing	Printer error. Check in the cassette, inside the printer, and in the duplexer to remove the jammed paper. Turn the printer off and then back on again. If the error does not clear, contact Epson.
The yellow ink out light is flashing	The firmware update has failed, and the printer is in recovery mode. Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for instructions on repeating the firmware update.

Khỏe Đẹp Son

Epson l350 blinking ink and paper light

Pos Terkait

Periklanan

BERITA TERKINI

Toplist Popular

Periklanan

Terpopuler

Periklanan

Tentang Kami

Legal

Dukungan

Social