Berapa harga conveyor belt per m2

Fabric BeltsYOKOHAMA fabric conveyor belts have been supplied to a wide range of applications. From mine to port, power plants to cement, chemicals, fertilizers and agribusiness, the performance is proven in many different industries.

Table of Contents Show

General Fabric Belt
MJ-Fabric Conveyor Belt
Berapa kapasitas belt conveyor?
Belt conveyor Terbuat dari bahan apa?
Karet conveyor untuk apa?
Apa kerugian menggunakan conveyor?

General Fabric Belt
MJ-Fabric Conveyor Belt
Protex

General Fabric Belt

Features and Benefits

Wide Selection of Belt Strengths

Available belt strengths ranges from 100N/mm up to 2,500N/mm covering a variety of applications.

Cover Compounds and Cover Gauges

Most of YOKOHAMA’s original high performance cover compounds are available with wide range of cover gauges.

Excellent Durability

Superior resistance to bending fatigue and outstanding rubber adhesion to fabric realize longer service life.

Perfect Load Support

Ensure maximum conveying capacity.

Reliable Vulcanized Splices

Hot vulcanized splice is recommended. YOKOHAMA offers industry proven splice technology.

Belt Selection

Carcasses ; Nylon/Nylon (NN) and Polyester/Nylon (EP)
Belt strength ; from 100N/mm to 2,500N/mm
Belt width ; 300mm - 2,400mm

Please consult with your local YOKOHAMA sales representative for more belt strength and size availability.

Key To Symbols

MJ-Fabric Conveyor Belt

Features and Benefits

Excellent Fastner Holding

YOKOHAMA’s original carcass design allows outstanding fastner holding.

Easy and Quick Installation

Eliminate long vulcanizing time and complex splice process.

Easy Maintenance

Excellent Flexibility

Applicable to conveyor with smaller pulleys.

YOKOHAMA MJ Conveyor Belt Data

GRADES	150	220	330	440	550
CONSTRUCTION	MJ-75 X 2P	MJ-110 X 2P	MJ-110 X 3P	MJ-110 X 4P	MJ-110 X 5P
TENSTION RATING VULCANIZED AND FASTENER	(N/mm) (lbs/in)	25 150	40 220	60 330	80 440	95 550
APPROX. BELT THICKNESS (1/8” X 1/16” COVERS)	(mm) (in)	8.1 0.319	8.0 0.315	9.7 0.382	11.7 0.461	13.7 0.539
APPROX BELT WEIGHT (1/8” X 1/16” COVERS)	(kg/m2) (lbs/ft2)	9.3 1.9	9.2 1.9	11.2 2.3	13.5 2.8	15.8 3.2
MIN. WIDTH FOR TROUGHING EMPTY 35° IDLERS	(mm) (in)	400 16	450 18	600 24	750 30	900 36
MAX. WIDTH ON 35° IDLERS FULLY LOADED WITH 100# MATERIAL	(mm) (in)	750 30	900 36	1200 48	1500 60	1800 72
RECOMMENDED MIN. PULLEY DIAMETERS	OVER 80% TENSION	(mm) (in)	400 16	450 18	600 24	750 30	900 36
OVER 60 TO 80% TENSION	(mm) (in)	350 14	400 16	500 20	600 24	750 30
OVER 40 TO 60% TENSION	(mm) (in)	300 12	350 14	400 16	500 20	600 24
TO 40% TENSION	(mm) (in)	250 10	300 12	350 14	450 18	500 20
TAIL & SNUB	(mm) (in)
RECOMMENDED FASTENERS	FLEXCO #140 FLEXCO R5	FLEXCO #190 FLEXCO R5	FLEXCO #140 FLEXCO R5	FLEXCO #190 FLEXCO R6	FLEXCO #2 FLEXCO R6
RECOMMENDED TAKE-UP SPACE AS % OF CENTER DISTANCE	MIN. 1.5% FOR POLYESTER AND MIN. 2.4% FOR NYLON (MIN. 500 MM OR 2 ’)

Protex

Discover the PROTEX difference today
Because you deserve better performance from your investment!

Problem

Does your portable crushing and other high abuse equipment suffer from product entrapment that punctures your expensive belts resulting in costly repairs or premature belt replacement? Excessive cover abrasion? Premature gouging and wear?

Solution

Yokohama PROTEX with UR Covers. Designed to be virtually “Maintenance Free” belts for portable quarry crushing and other high abuse equipment, PROTEX belts give you greater peace-of mind with the lowest cost per tonnage and best ROI on the market today.

Trapped Material Test

Yokohama PROTEX features a special polyester fabric with elongation at break 1.8 times higher than Nylon fabric. Nevertheless, belt stretch under operating tension is less than that of conventional polyester fabric belts.

Comparison of belt stretch at normal & abnormal operation

	PERMANENT ELONGATION	TAKE-UP TRAVEL
NYLON FABRIC:	1.3 - 1.8%	over 2.4%
CONVENTIONAL POLYESTER:	0.5 - 1.0%	over 1.5%
PROTEX:	0.5 - 0.7%	over 1.0%

Yokohama PROTEX belts with UR Covers

UR covers were initially developed by Yokohama to handle heavy limestone rock before and after primary crushers. UR cover belts have succeeded in improving belt life with superior impact and gouge resistance features superior to that of RMA-1 cover belts.

Comparison of impact resistance with UR covers

PROTEX belt absorbs impact like no other belts.

PROTEX BELTS = TOUGH, FLEXIBLE, AND LOW-STRETCH

・ Excellent resistance against trapped material & cake build-up on pulleys
・ Excellent impact resistance and cut & gouge resistance
・ Superior abrasion & wear resistance under extreme conditions
・ Less permanent elongation & belt stretch
・ Best choice in rough operating conditions. ie Portable Cone & Jaw Crushers

Let us show you how Yokohama PROTEX belts can take the abuse & deliver!

BELT SELECTION:

BELT STRENGTH	NO. OF PLIES	COVER RUBBER THICKNESS	BELT WIDTH	BELT THICKNESS	LENGTH /R
(N/MM)	500	600	700	750	800	900	1000	1050	1200	1400
500	2	6.0 x 3.0		*		*		*	*	*	*		12.4	200
630	2	8.0 x 3.0						*		*	*	*	15.1	200

*Belt strength such as 1000/4 and 1250/4 for large lump material transportation or other than above specifications are available.

Berapa kapasitas belt conveyor?

Konveyor sabuk sendiri didefinisikan sebagai suatu alat yang digunakan untuk mengangkut atau memindahkan material dari satu tempat ke tempat lain secara terus menerus. Konveyor sabuk dirancang untuk mengangkut batu kapur dengan kapasitas 2200 ton/jam, kecepatan sabuk 1,43 m/s dan panjang 398 m.

Belt conveyor Terbuat dari bahan apa?

Alat tersebut terdiri dari sabuk yang tahan terhadap pengangkutan benda padat. Sabuk yang digunakan pada belt conveyor ini dapat dibuat dari berbagai jenis bahan misalnya dari karet, plastik, kulit ataupun logam yang tergantung dari jenis dan sifat bahan yang akan diangkut (Zainuri, ST, 2006).

Karet conveyor untuk apa?

Karet conveyor umumnya digunakan sebagai komponen dalam distribusi dan pergudangan otomatis. Alat ini sangat disukai di mana-mana saat ini karena dianggap sebagai cara penghematan tenaga kerja yang sangat efisien dan membuat transportasi lebih mulus dan efisien.

Apa kerugian menggunakan conveyor?

Jika tidak dirawat dengan baik, conveyor dapat mengalami keausan sabuk cepat dan kerusakan komponen, dengan akibat penghentian dan waktu henti. Ini memiliki dampak negatif yang sesuai pada produktivitas dan laba.