- Remove From My Forums
Question
Got the error message:
Windows cannot access \\ip address, check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve problems, click Diagnose: Error code: 0x80070035 The network path was not found.
Any help?
Answers
Hi,
The error code 0x80070035 indicates that the network path is not found. This behavior occurs if the NetBIOS over TCP IP is not enabled in Windows. Please try the steps below.
1. Click "Start", input "NCPA.CPL" (without quotation marks) and press Enter.
2. Right click on the connection that you use for the local connection, and then click "Properties".
3. Click Continue button to verify the administrator permission.
4. Click to select "Internet Protocol Version 4 (TCP/IPv4)", and then click "Properties".
5. Click "Advanced" button in the open window. On the "WINS" tab, click to select "Enable NetBIOS over TCP/IP", and then click "OK" to save the setting.
If the issue still persists, try the following method:
Start type secpol.msc
go this path -> local policies -> security options -> network security: Lan Manager authentication level
-> double click and choose second choice -> Send LM & NTLM- use NTLMv2 session security if negotiated
Maybe helpful.
Best Regards,
Tao
Please remember to mark the replies as answers if they help. If you have feedback for TechNet Subscriber Support, contact .
- Marked as answer by Thursday, March 15, 2018 1:09 PM
Are you the one getting the error code 0x80070035, while connecting your Windows 10 system to another computer? Looking for the fixes to get rid of the – Error code: 0x80070035. The network path was not found. Then read the article to follow the complete fixes.
Microsoft allows the Windows computer to share files between two systems connected to the same network. But some users are encountering the error when trying to share the files and data with each other.
Network Error
Windows cannot access \\sharedNAS
check the spelling of the name otherwise there might be a problem with your network, to try identify and resolve network problems, click Diagnose.
Error code 0x80070035 The network path was not found.
Well, the 0x80070035 Windows 10 error is very irritating, and it is estimated is faced by the users due to antivirus or the Windows Defender Firewall blocks the system resources. So, apply the below-given solutions one by one to troubleshoot error code 0x80070035 The network path was not found.
How do I Fix Error Code 0x80070035 in Windows 10?
- Solution 1: Turn off the Antivirus and Firewall
- Solution 2: Check your Drive is Shared
- Solution 3: Try to Reinstall the Network Adapters as well as the hidden adapters
- Solution 4: Enable NetBIOS over TCP/IP
- Solution 5: Delete all Windows Credentials
- Solution 6: Change the Network Security Settings
- Solution 7: Utilize Windows Command Prompt
- Solution 8: Enable Network Discovery
- Solution 9: Add IPv4 protocol over TCP/IP
Solution 1: Turn off the Antivirus and Firewall
In order to turn off the Windows Defender Firewall, follow the below-given steps:
1: First you have to open the control panel, to do this press the Windows + R, and in the Run box type control panel then hit the Enter key.
2: From the list, click on the Windows Defender Firewall then from the left-hand side, click on the Turn Windows Defender Firewall on or off.
3: Now, you have to select the radio button present along with the Turn off Windows Defender Firewall (not recommended). You have to do this task for both the Private and Public network settings.
4: At last, click on the OK to save the settings and reboot your computer.
Solution 2: Check your Drive is Shared
1: Right-click on the drive that you want to access and go to its Properties.
2: Now, navigate to the Sharing tab and verify if the network path displays Not Shared. After it, you have to click on the “Advanced Sharing” option.
3: From the Advanced sharing window, tick marks the box for “Share this folder”. Make sure that you have entered the correct drive name. At last, choose Apply and then Ok to save the modifications.
4: Next press Windows key + R > to open the command prompt > type the name of the folder > hit Enter. and you are able to access the folder without any error.
Solution 3: Try to Reinstall the Network Adapters as well as the hidden adapters
1: Again open the run dialogue box (Press Windows + R), type devmgmt.msc and press the Enter key. This will open up the Device Manager.
2: Now, click on the View tab present in the Device Manager
window and check on the Show hidden
devices.
3: You will see the hidden adapters, right-click on all the drivers, and uninstall them.
4: Reboot your computer and check for the issue.
Solution 4: Enable NetBIOS over TCP/IP
This solution worked for many users to fix the Windows 10 explorer network error 0x80070035 the network path was not found. So, follow the steps to enable the NetBIOS over TCP/IP.
1: Open the run box by pressing the Windows + R keys, in the run box you have to type the ncpa.cpl and press the Enter key. This will open up the properties of WiFi.
2: Right-click on the WiFi network and choose the Properties.
3: Now, double-click on the Internet Protocol Version 4 to open the properties.
4: Then, click on the Advanced and navigate to the WINS tab.
At last, from the NetBIOS setting, you have to select the radio button at “Enable NetBIOS over TCP/IP.” Then click on the OK to save the changes.
Solution 5: Delete all Windows Credentials
1: Go to the Control Panel of your system and choose the Credential Manager.
2: From the Windows Credential section, delete all the credentials and reboot your system.
3: If the system asks to enter all Windows credentials then reenter the credential.
I hope this works for you to fix the error code 0x80070035 in Windows 10. But if still struggling with the Windows 10 problem then head to the next solution.
Solution 6: Change the Network Security Settings
Follow the steps to carefully change the Network Security Settings.
1: Open the run box (press Windows + R) and type secpol.msc then press the Enter key. This will open up the Local Security Policy window.
2: Go to the Local Policies >> Security Options.
3: From the right pane, you have to double-click and open the properties for Network security: LAN Manager Authentication Level.
4: At last, using the drop-down menu, choose the Send LM & NTLM-use NTLMv2 session security if negotiated.
Solution 7: Utilize Windows Command Prompt
1: Press Win + X and select the Command Prompt (Admin)
2: After it, simply run the given commands one-by-one and hit Enter after each
ipconfig /release
ipconfig /flushdns
ipconfig /renew
3: Restart the system and check for the issue. If you are still unable to solve the error code 0x80070035 then run the following command:
ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
At last, reboot your system check for the Windows cannot access check the spelling of the name error.
Solution 8: Enable Network Discovery
Many users confirmed that turning on the network discovery works for them to fix the error 0x80070035 Windows 10.
Follow the steps to do so:
1: Hit Win + R > and in the Run dialog box > type the command control panel and open it
2: Then click and open the Network and Sharing Center.
3: And on the left side in the menu > choose Change Advanced Sharing settings.
4: Next shift radio button to the option Turn on network discovery > checkmark the box that shows Turn on automatic setup of network-connected devices.
5: Lastly, restart your system
Solution 9: Add IPv4 protocol over TCP/IP
Open the run dialogue box (press Windows + R keys), in the run box type ncpa.cpl and press the Enter key.
Now, choose your connection and right-click on it then select Properties.
Find out the box for “The connection uses the following items” and then click on the “Internet Protocol (TCP/IP) Version 4” from the field.
Hit the Install button.
Then, choose “Protocol” and click on Add on the Select Network Feature Type wizard.
When the Network Protocol pop up appears, select the Reliable Multicast Protocol then OK.
It is estimated after following the above-given fixes you are able to fix “check the spelling of the name otherwise there might be a problem with your network” error.
PEOPLE ALSO ASK:
1: What does Network path not found mean?
The network path is a location where one can store files, local paths, and others. But if in case your computer won’t find the file while trying to connect another computer in the same network then it shows the error message the network path not found. In simple words when your system cannot find the network path that is connected to.
There are many reasons responsible for the error code 0x80070035 the network path not found but the most common reason is the name of the computer in which you are trying to connect is long so try to shorten it. Despite this, there are other reasons as well like firewall, third-party antivirus programs, outdated network drivers, or the corrupted system files.
3: How Do I Fix Network Path Not Found Error?
Try the fixes like modify the network security settings, turn off the third-party antivirus or firewall programs, update the network drivers, reset TCP/IP, enable sharing on the remote device, and other given in the article here.
Make Your Windows PC/Laptop Error-Free
If after following the above-given fixes your system starts running slow, crashing, or freezing then it is suggested to scan your system with the PC Repair Tool.
This is an advanced repair utility that fixes various computer problems like stubborn Windows errors, protects your from virus/malware, DLL error, repair corrupt registry entries, and many other errors and issues in the Windows system.
This not only fixes errors but also optimizes the Windows PC performance.
Get PC Repair Tool, to improve Windows PC/laptop performance
Conclusion
It is estimated the article worked for you to fix the Error code 0x80070035, The network path was not found” in Windows 10.
Make sure to type the commands and follow the given solutions carefully, to avoid further issues.
If you are having any comments, suggestions, or queries regarding the one projected than feel free to share with us.
Good Luck..!
Always up to help others with their PC-related issues, Jack loves to write on subjects such as Windows 10, Xbox, and numerous technical things. In his free time, he loves to play with his dog “Bruno” and hang out with his friends.